Uncategorized

Transportation and storage of pipes

The Advantages of plastic pipes made of U.P.V.C are that they are light, Strong and their Weight is equivalent to one-fifth of the weight of cast iron. Therefore the transportation of these types of pipe is easier than transportation the other metal or asbestos cement and its similarities.

Steps

Attention should be given to the process of unloading the plastic pipes and dropping them gradually and not on the ground.

Pipes May not be placed in large heaps,  especially in hot weather times of the year, resulting in distortion for pipes located at the bottom of the heap, making it  ifficult to connect the connection.

When storing plastic pipes should be placed  with method of head and tail.


In long-term storage, special shelves must be secured for pipes. If this is not possible wooden board shall  be used of 75cm width at a distance of one meter between each plate, for pipes of diameter 160mm or more.


If pipes of different diameters are stored together in the same racks, the larger pipes
shall be measured down.


for temporary storage in the work site, the floors on which the pipes are stored must be leveled and free of stones.


When unloading, pipes shall be rolled on wooden planks gently and shall not be
thrown on one to another or on a surface that is not paved, in the absence of a crane
or winch.


In storage, the storage roof should be sufficiently wide and at a tilt angle to prevent
direct sunlight through the axis of its rotation from east to wes.

A luctus non viverra vestibulum eu hendrerit scelerisque malesuada ad dis cras iaculis aliquam netus hendrerit semper nec ac dolor eleifend orci cum quis dictumst cum bibendum montes eleifend. Egestas nascetur neque commodo nunc. Cras consectetur ipsum donec facilisi curabitur a fames sociis sagittis. Condimentum conubia. Condim entum a parturient dui parturient vulputate vehicula dis mi placerat at in augue.