- Insert the tail of the pipe in the head and put a circular mark to determine the distance between the head and tail.
- The tail of the pipe shall be rinsed with a suitable Abrasive, especially
- The head and tail of the conveyor shall be thoroughly cleaned with a piece of dray cloth.
- Tread material well before use.
- The adhesive material shall be painted with a brush suitable for the diameter of the pipe in one direction on the tail of the pipe and inside
the head. - The tail shall be inserted in the head of the conveyor at the full distance indicated by the mark on the tail of the conveyor, bearing in mind
that the convertor is not rotated. - The operation of the line is tested after 24 hours to complete the paste.
- Do not leave the adhesive material exposed until it is now exposed to dryness.
